Bright Aluminum Jump Rings

Description

Bright aluminum jump rings in 16 SWG wire at 7/32 inch inner diameter, left uncolored.

Bright aluminum is the natural mill finish. It is the usual base people weave against anodized colors when they want the pattern to carry the design instead of the palette.

These rings run an aspect ratio of 3.5 — inner diameter divided by wire thickness. The tight European 4-in-1 range. This is what people mean by a proper maille sheet: the weave sits dense, holds its shape, and drapes without gaping.

Sixteen gauge is the general-purpose armor wire: strong enough to wear all day, still closable by hand without bench tools. Most wearable shirts and coifs are built on it.

This is the size where the gauge confusion bites hardest. At 16 SWG the wire measures 0.063 inch and the ratio lands near 3.5, the tight European 4-in-1 sweet spot. A ring sold as 16 AWG at the same inner diameter is thinner wire and weaves visibly looser, so the two are not interchangeable inside one project.

The pack runs approximately 4,000 rings. At two rings per scale plus a ten percent spare buffer, that carries roughly 1,818 scales of scalemail.

Aluminum weighs roughly a third of what steel does ring for ring, which is why full shirts and long panels get built in it rather than in steel.

Shipping weight: 499.0 g (17.6 oz). Free US shipping, no minimum.